FPM F Series
Large Display Optical Measurement Systems
The FPM F Series is our largest series of test systems for up to 110″ displays.
Our FPM F Series can be setup to run many standard VESA, ICDM, TCO, ISO, SPWG and other display optical measurement tests as well as programmable customized tests. We offer test sequences that cover most display measurement requirements or you can write your own. Contact Us to learn more about the FPM capabilities.
Mount up to 3 instruments at a time. Software control integration for most of the popular optical instruments available
Test Pattern Generators
Automated control of the Westar T-Drive LCD Tester and many other popular test pattern generators on the market today
Test without moving the display
All of our FPM F Series systems include a five-axis motion system comprised of a three-axis instrument deck and a two-axis gimbaled optical probe to perform measurements while the display remains fixed and in an upright position. This design allows for viewing angle measurements without moving or rotating the large and heavy display module thus avoiding potential mechanical strains and unexpected thermal gradients within the display or TV.
Up to 84″ Displays
For large displays, our FPM-530-FO is designed to perform full optical performance tests on displays up to 84” (213 cm).
Up to 110″ Displays
For very large displays, our FPM-540-FO is designed to perform full optical performance tests on displays up to 110” (279 cm).
Full optical characterization
Our FPM F Series can be set up to run many standard VESA, ICDM, SAE, TCO, ISO, SPWG and other display measurement tests as well as programmable customized tests. We offer test sequences that cover most display measurement requirements or you can write your own. Contact Us to learn more.
Center Screen Luminance
Center Screen Color
Correlated Color Temperature
Color Gamut and %NTSC
Shadowing (Cross Talk)
Gray Level Response Time
Contrast Ratio Uniformity
Luminance vs Viewing Angle
Contrast Ratio vs Viewing Angle
Color vs Viewing Angle
Warm Up Time
Wide selection of direct view or fiber-coupled instruments supported
Works with optical instruments from all the popular brands
Our Display Measurement Systems work with more LMDs than any other display measurement system. Our systems support standard photometers and spectroradiometers from Topcon, Photo Research, Optronic Laboratories, and Minolta. This broad range of available instrument interfaces allows you to pick the best instrument for the job
Install and control up to 3 instruments
The FPM F Series can be customized to accommodate (hardware integration) up to 3 optical instruments depending on your display metrology needs. The FPM F Series comes standard with a fiber-coupled spectrometer and options for up to two additional direct-view instruments. The FPM F Series supports the following instruments:
Automated test pattern generation
Of course, automated display testing doesn’t stop with the instrument and a positioning system. You need to automate display drive using a lcd tester or test pattern generator that can drive display modules or finished products.
Our most popular lcd tester for display drive is our T-Drive III but as with optical instruments, our ViewPoint software can interface with most test pattern generators on the market today. We even offer custom software interfaces to work with specialty LCD drive equipment.
TestStand - Automated Test Sequencer
- Access motion base, instruments, test pattern generators, and other supported devices using test objects
- Structure test steps into sequences and subsequences with global and local parameters
- Powerful development interface for sequence design and debugging
- Easy to user interface for sequence operation and control.
- Access Microsoft Excel for data reporting
ViewPoint - Manual Control Interface
The FPM F Series comes with a sleek user interface for manual control called ViewPoint. In a single interface, the user can control the instruments, light sources, test pattern generators, and motion base. ViewPoint can be customized with software controls for your specific instruments, test pattern generators, and power supplies.
- Access motion base, instruments, test pattern generators, and other supported devices
- Multi-view dockable GUI windows – arrange multiple DUT Control, Motion Control, and LMD GUIs
- Property grids for easy parameter input
- Enhanced CIE chromaticity charts (NTSC reference gamut, multiple measurement points, print graphs)
- Enhanced measurement history and reporting tools (print standard measurement reports from the MCI).
Our FPM F Series comes standard with Microsoft Excel for data reporting. Use one of our pre-formatted reports or design your own.
|Parameter||Standard FPM F Series Configurations||Custom Config.|
|Instrument Motion Base||FPM-530-FO||FPM-540-FO||FPM-5XX-FO|
|X-Axis Range (Left - Right)||Contact Westar||106” (269.2 cm)||Contact Westar|
|Y-Axis Range (Up - Down)||60” (152.4 cm)|
|Z-Axis Range (In - Out)||23.5” (59.7 cm)||23.5” (59.7 cm)|
|Gimbal (Viewing Angle)||FPM-530-FO||FPM-540-FO||FPM-5XX-FO|
|Range of Motion (see note 1)||Inc: ±90º Az: ±90º||Inc: ±90º Az: ±90º||Contact Westar|
|Accuracy, Precision||±0.25º, 0.10º||±0.25º, 0.10º|
|Spot Tracking Accuracy||±0.1” (2.54 mm)||±0.1” (2.54 mm)|
|Max Display Size||84" diagonal||110" diagonal||Contact Westar|
|Max Display Weight||400 lbs. (200kg) with movable DUT cart. Other options available to increase limit.|
|Test Capabilities (see note 2)||FPM-530-FO||FPM-540-FO||FPM-5XX-FO|
|Center Screen||Luminance, Color, Contrast Ratio, Gamma, CIE Chromaticity, Color Gamut and %NTSC, CCT|
|Uniformity||Luminance Uniformity, Color Uniformity, Contrast Ratio Uniformity|
|Viewing Angle||Luminance vs. Viewing Angle, Contrast vs. Viewing Angle, Color vs. Viewing Angle|
|Temporal||Gray Level Response Time, Flicker|
|Other||Shadowing (Cross-Talk), Image Retention, Warm-Up time|
|Standardized Test Suites||VESA FPDM 2.0, ICDM, TCO ’99/’03/’05, ISO 13406-2, SAE, Others|
|Custom Tests||Yes, Contact Westar|
|Max Number of Instruments||3||3||Contact Westar|
|Instruments Included||Fiber-coupled spectrometer included. Select up to two additional direct view instruments or contact Westar for fiber-coupled instrument options|
|Options and Accessories||FPM-530-FO||FPM-540-FO||FPM-5XX-FO|
|Optional Instruments||Instruments from Westar, Topcon, Minolta, Photo Research, BW-Tek, Optronic Laboratories|
|Optional LCD Testers||Westar T Drive Series, Astro VG Series, Quantum Data QD Series|
|Optional Power Supplies / DMM||Sorensen DLM Series, Keithley 2000, 2400|
|System Controller PC||FPM-530-FO||FPM-540-FO||FPM-5XX-FO|
|Processor / Motherboard||19” Rack Mounted Industrial PC with 7X USB, 6X RS-232, 2X Ethernet Ports|
|Monitor and Peripherals||22” LCD Flat Panel, Keyboard, Mouse, Joystick|
|Operating System and Software||Microsoft Windows, Microsoft Office, National Instruments TestStand, Westar ViewPoint|
|System Dimensions W x D x H (in)||Contact Westar||56" x 71" x 108"||Contact Westar|
|PC Rack Enclosure W x D x H (in)||22" x 25" x 43"|
|Power||120 VAC, 15A, 60Hz|
The standard configuration FPM F Series includes the following:
Check out the Options and Accessories to find out more information on customizing the FPM F Series for your application
We have an extensive catalog of options and accessories for the FPM F Series including:
- Optical instruments and software
- LCD testers and test pattern generators
- Power supplies and DMMs
- Display fixturing and mounting options
- Customized test sequences
Contact Westar for more information on options and accessories