LCD Controller - VP7-3ATI

VP7-3ATI

LCD Controller

The VP7-3ATI LCD Controller interfaces with 3ATI displays and other TFT panels requiring a small form factor. The VP7-3ATI is the ideal LCD controller for applications requiring high fidelity analog or digital video conversion, re-sizing, and frame rate conversion for resolutions up to SXGA.

Features

Z

Supports standard and custom video formats

Converts a wide variety of video formats including RS-343 to LVDS, RS-170 to LCD, RGBHV to TTL, and custom video formats

Z

Video retiming and reformatting

Video area-of-interest control, resizing, retiming, and reformatting

Z

Video input sync

Supports video sources with sync-on-green and composite video syncs

Z

Programmable power sequence

Programmable TFT power sequencing for unique operational modes

Applications

3ATI displays

Configurable video electronics for 3ATI displays

Ruggedized tactical displays

LCD controller for ruggedized tactical displays

Embedded applications

With its low-profile design and locking high-density Hirose connectors, the VP7 is ideal for space-constrained displays

Custom display solutions

Perfect for applications that require a configurable lcd controller

Optimized for Embedded Applications

With its low-profile design and locking high-density Hirose connectors, the VP7 is ideal for space-constrained displays. The RS-232 interface allows easy updates even after the VP7 is installed in your display.

Interfaces with many 3ATI Displays

The VP7-3ATI has broad capabilities needed to interface to many 3ATI display devices such as the Korry KDM-340 Series, the American Panel Corporation APC 340, and the IDC 3ATI. In some cases, such as the Korry KDM-340 Series, the VP7-3ATI can directly drive the display. Westar offers an ancillary power board to drive the APC 340 display.

Supports Standard and Custom Video

In addition to converting analog RGB for TFT panels, the VP7 is great for digitizing interlaced video formats such as RS-343, RS-170, and STANAG. The VP7 can also be programmed to support custom or non-standard video formats.

Looking for enhanced capabilities?

If you require higher resolution or other capabilities, we offer a full line of LCD Controllers.

Specifications

Specifications
Dimensions
3.05″ x 2.84″ x 0.50″
Temperature Range
  • Operating: 0°C to +70°C
  • Storage: -40°C to +100°C
Video Inputs
  • Up to SXGA resolutions @ 60Hz
  • Analog Input (162 MHz) DVI Input (165 MHz)
  • Standard and custom timing
  • Syncs (Digital Separate, Digital Composite, Analog Composite)
Video Outputs
  • Single LVTTL (24 bit panel)
  • Single LVDS outputs
  • Pixel rate single = 108 MHz
Features
  • Independent horizontal and vertical scaling
  • Video Flip (left-right, top-bottom)
  • Frame Rate Conversion
  • De-Interlace
  • Inverter Interface
Input Power
+7 to +28 VDC, 4W power consumption @ XGA
resolution (does not include panel and backlight requirements)
Control
RS-232
Connector Hirose DF11 Description
J1
8 Pin Discrete In and Contrast
J2
10 Pin FPGA Configuration
J5
10 Pin RS-232 Control
J7
6 Pin Power Input
J7
10 Pin Analog Video Input
J10
16 Pin Discrete I/O to Display
J11
10 Pin Control to Display
J12
32 Pin Digital Data Output
J13
14 Pin LVDS Output
J16
14 Pin Backlight Inverter Control
J19
8 Pin BIOS Table Select
J20
8 Pin External LED Connection
J21
12 Pin TMDS Input
J22
4 Pin EDID Interface

Ordering Information

The VP7-3ATI includes:

  • VP7-3ATI LCD Controller Board
  • Configuration Utility Software

Contact Westar for display cabling and adapters.

Want to find out more?

If you are interested in more information, send us an inquiry.