DCP
Low Latency Distortion Correction Processor
The DCP_LL is a low latency, general purpose distortion correction processor. The DCP has numerous applications with a common requirement to “re-shape” incoming video prior to a subsequent display device. This re-shaping may be prior to a projector, or to “undo” the video shaping intended for a projector, prior to a flat panel display.
The DCP can be purchased with 1 to 6 I/O channels. Although some data sharing is possible across channels, typically an I/O channel processes and outputs pixels received on its input. Data may be required from neighboring I/O channels if the distortion correction requires video that is received on neighboring channels.
Features
Supports up to 6 projectors
Supports up to (6) input video streams and outputs up to (6) projectors
DVI I/O resolutions up to 1920 x 1080 (HD 1080P)
Each I/O can support resolutions up to 1920 x 1080
Powerful processing capabilities
Supports geometric correction, color and intensity correction, video area-of-interest control and re-sizing
Applications
Distortion Correction for High Resolution projectors
Processing video for a projector into video for a IOS monitor
High Resolution, edge-blended displays
Specifications
| Parameter | Specification |
|---|---|
| Video Input | |
| Video Type | DVI; HDMI connector |
| Pixel Rate | Up to 154 MHz |
| Standard Computer Resolutions | Up to 1920x1200 (Programmable EDID included for each input channel) |
| Video Output | |
| Video Type | DVI; HDMI connector |
| Pixel Rate | Up to 154 MHz |
| Standard Computer Resolutions | Up to 1920x1200 (EDID Read function for each output channel) |
| Functional | |
| Features | Geometric, color, and alpha corrections per pixel Each projector output has access to area-of-interest within the Source Image Plane Includes data sharing to handle video overlap regions outside of the image generator |
| Color processing depth | 8 bits per color I/O, 12 bit per color internal processing |
| System | |
| Dimensions | Rackmount config: 19”W x 13.75”D x 3.5”H (2U), Benchtop config: 17.4”W x 13.75”D x 3 7/8”H |
| Weight | Less than 10 lbs. |
| Tester Control | USB 2.0 |
| Power | IEC Connector, 100-240 VAC, 47-63 Hz, 150 Watts Maximum Input Power |
| Warranty and Support | |
| Warranty | 1 Year Limited Warranty |
| Technical Support | Phone and Email Support Available |
Ordering Information
The system comes standard with:
- DCP base unit as ordered (1-6 I/O channels)
- USB Cable
- DCP API (Linux and Windows)
- DCP Utility Software
- DCP Documentation (API Guide, Instruction Sheet)