
SP9
Multi-Function DVI Processor
The SP9 supports various single link DVI (HDMI) conversion and combining applications up to 1080P resolutions. Up to 4 windows can be placed in up to 4 layers. Each of 4 outputs can be selected from 1 of 4 layers or 1 of 2 blended areas. All outputs are the same timing. For new designs, Westar recommends SP9 over SP2_C003 due to superior keying, on-screen messaging, test patterns, and output switching.
Inputs
Supports up to 4 SL-DVI (TMDS) inputs, up to 165 MP/sec each
Outputs
4 SL-DVI (TMDS) outputs, up to 165 MP/sec each
Video Features
Applications
Display Interfaces and Control

Input Features
- 4 SL-DVI (TMDS) inputs, up to 165MP/sec each — compatible with HDMI up to 1080P and 1920×1200/60Hz (WUXGA)
- Multiple pre-configured input modes per port, monitored by the built-in Mode Handler Control
- Programmable EDID per input port
Synchronization
- Frame rate conversion; free running or gen-locked outputs. Gen-locked mode locks to one of the inputs and provides the lowest possible latency
Output Features
- 4 SL-DVI (TMDS) outputs, up to 1920×1200 each
- Each output may connect to a dedicated display, or be configured as 4 vertical stripes for a 4x SL-DVI projector
- All outputs have the same resolution and timing
- SL-DVI is HDMI compatible — use a DVI to HDMI cable for HDMI sources or sinks
Remote Interface Control
- Remote interface for both initial configuration and dynamic operational control
- Dynamic commands allow real-time update of a window’s source, area-of-interest, size, location, rotation, and color adjustments
- 2 RS-232 ports and USB standard, Ethernet optional, with commands defined in the SP9 Command Line Description
Video Features

Scaling, Combining, Windowing, & Area-of-Interest
- Up to 4 windows defined and placed within 1 of 4 layers; each layer is the same resolution as the output active area
- Flexible input area-of-interest, re-sizing, and window placement controls
- Reverse image left/right or flip top/bottom
- Rotate image 90, 180, or 270 degrees
- PIP by assigning windows to a layer; programmable alpha values support z-order priority and alpha blending per window overlap area
Optional Video keying
- 2 independent key blocks, each with 1 set of key equations and 2 rectangular key areas
- Key calculations based on the pixel’s RGB, Luma, or HSV value, with programmable foreground & background alphas when key is true or false
- Separate user-defined foreground and background alphas outside the key areas
Applications
Landscape video combining
A SP9 is used to combine 4 different SL-DVI video feeds (inputs 1-4) into a single 1080P image. Each layout is easily configured by a series of windowing commands, making SP9 ideal for viewing multiple video sources.
Portrait video combining using a standard display
A SP9 is used to capture 3 different video feeds from a normal landscape raster, rotate and combine to allow a normal landscape 1080P display to be used as a portrait display.

Video processor for simulated MFD displays
A single SP9 is used to independently combine symbology video and sensor video for 2 simulated MFD displays.

Driving portrait displays in a helicopter simulator
In this example, 3 SP9 :Key units are used to drive 5 Multi-Function Display (MFD) units and 2 Control Display Units (CDU) in a common helicopter simulation application. The SP9’s ability to capture, rotate, and key video allows effective use of Image Generator assets.
(Optional Feature) Keying on a video input to combine with a 2nd input
An SP9 :Key is used to key a live video feed (in the foreground) over a map graphic (in the background). The key area is set to a rectangle; using HSV keying the greenish area becomes transparent, thereby passing the background. Outside the key area is also programmed to be transparent.

Seamless switcher
An SP9 :Key receives 4 SL-DVI inputs. Each output is programmed to display a) any of the 4 inputs, b) a Test Pattern, or c) any of 2 blended layers. All outputs are the same timing and resolution and are synced to each other, thereby providing a “seamless” switch.

Powerful Configuration Utility
Use Westar’s SP9 Configure application to define the input modes, output timing, keying scheme (optional feature), and the area-of-interest within the source video and where to map the AOI within the output resolution. The application creates a downloadable .cfg file and supports in-the-field firmware and FPGA updates. The configuration utility supports user-defined:
- Input Timing and Output Timing
- Video Scaling and Area-Of-Interest (AOI)
- Window Size, Location, and Layer Mapping
- “Key” Processing (optional feature)
- Image Flip (Horizontal and Vertical)
- Image Rotate
Specifications
| Specification | Description |
|---|---|
| Video I/O | SL-DVI (up to 165 MP/sec), 4 Inputs, 4 Outputs, up to 1920×1200 each |
| Physical Dimensions | 1U 19″ Rackmount, 19″ x 1.75″ x 8″ deep |
| Temperature Range | Operating: 0°C to +70°C (additional data available); Storage: -40°C to +100°C |
| Input Power | IEC Connector, 100-240 VAC, 47-63 Hz, less than 60 Watts |
| Weight | Less than 4 lbs |
| Control Interface | 2 RS-232, USB, Ethernet (optional) |
| Support Documentation and Applications | SP9 Command Line Description, SP9 Users Guide, SP9 Configuration Application and Manual |
| Warranty | |
| Warranty | 1 Year Limited |
Ordering Information
The SP9 consists of the unit, IEC power cord, and USB cable.
For configurations with optional keying, add :Key. For configurations with optional Ethernet, add :E.
| Configuration | Description |
|---|---|
| SP9 | Base configuration: 4 SL-DVI inputs, 4 SL-DVI outputs, alpha blending standard |
| SP9 :Key | SP9 with Keying enabled |
| SP9 :E | SP9 with Ethernet enabled |
| SP9 :E :Key | SP9 with both Keying and Ethernet enabled |


